3- REMOVING PROTECTIVE MATERIAL

STEP 1

Remove all protective material from the bike. 

IMPORTANT: Please take care so that the bike frame does not get scratched.

STEP 2

Remove the front wheel off the

In order to release the wheel from the pedal, it might be easier if you lift the rear wheel and turn the left pedal anti-clockwise a bit and then remove the wheel from the pedal

STEP 3

Find the small bag of 4 small bolts, which will be used for rear basket assembly.

The plastic bag is usually attached to the bike’s front forks

STEP 4

Remove the plastic fork protector from the front fork

STEP 5

Remove the steel fork protector from the front fork by loosening the nuts on both sides

STEP 6

Remove the plastic cap from the handlebar stem

STEP 7

Open the accessories box .

(Which includes the power adapter, basic assembly tools, front light, pedals, bike’s manual and LCD’s manual)

STEP 8

After all protective materials are removed, your bike should look the same as that the photo.