750W DiroDi Rover is locked to 250W of power and 25 km / h speed out of the box. For off-road use, you can change the power to 500W (By changing the bike’s mode from Echo to Normal) or to 750W (By changing the bike’s more from Echo to Power). You can also change the max speed as well, for off-road use. Please refer to step 12 of the assembly instructions for more detail.
Rear rack max load is 7kg. If the max load exceeds 7kg, the rear carrier could get bent or broken. In no circumstance should a child seat be installed on the rear rack.
This manual contains several chapters and each chapter contains several steps. Each step has a descriptive paragraph and some photos. By clicking on each photo, you can view it in full size.
This manual explains the assembly instructions mainly. Therefore please also read the other manual that comes with the bike and includes information regarding the operation, maintenance, safety measurements, etc.
IMPORTANT: For the assembly steps, please first completely read a step and view all the related photos and then proceed with performing that step.
If you face any difficulties during the assembly, please contact us via the website’s live chat.
If there are any mistakes in the manual or any information should be added or revised for a better assembly experience, please let us know via the live chat.
1x 8mm wrench
1x 10mm wrench
1x 15mm wrench
1x Adjustable wrench
1x 4mm Allen key
1x 5mm Allen key
1x 6mm Allen key
1x screw driver