Pump front and rear tyres. Tyre pressure should be in the range specified on the tyre.

IMPORTANT: While pumping the tyres, stop a few times and ensure the tyre bead has seated properly all the way around the rim. If the bead starts moving up anywhere, deflate a bit, squeeze and push the bead to get it even all around and continue inflating. If any part of the tube comes out of the rim during tyre inflation, it could lead to tube burst. In a properly seated tire, the bead line — the thin line moulded low on each sidewall — will be just above the rim all the way around on both sides. 

Start typing to see posts you are looking for.